Roof Repair & Replacement in Melbourne, FL

Professional roofing contractors serving residential and commercial properties throughout Melbourne and the Space Coast. Our in-house crews handle every phase of roof repair, replacement, and inspection with full licensing, a clear chain of command on every job, and diagnostic technology that uncover problems conventional inspections miss.



Experienced Roofers for Melbourne Properties
- GAF Master Elite® and President's Award Contractor (top 1% nationally)
- Florida license CCC1334010 held by Tyler Nerland
- 4.8 stars across 200+ Google reviews
- GAF Commercial Certified and GAF Solar Certified
- Owens Corning Preferred Contractor
- Over 7,000 roof installations completed in Florida
- All in-house roofing employees with no subcontractors
- Operating since 2020
Why Professional Roofing Credentials Matter in Brevard County
Melbourne's coastal environment subjects roofing systems to salt air corrosion, thermal cycling that expands and contracts decking daily, and wind uplift pressures far exceeding inland norms. A roof that meets minimum code in Georgia or Tennessee will fail prematurely here. Asphalt granule loss accelerates under UV intensity. Fastener corrosion begins within months if non-approved fasteners are used. Underlayment adhesion to hot decking requires specific peel strength and temperature tolerance that commodity products do not provide. When these details are missed, the result is premature leaks, denied insurance claims, and a replacement cycle that costs homeowners tens of thousands ahead of schedule.
Many contractors licensed elsewhere work in Florida during storm seasons without proper licensing, relying on temporary permits and unlicensed subcontractor labor. This creates two distinct risks: the homeowner has no recourse when workmanship fails, and the insurance carrier may deny coverage for a claim tied to unpermitted or unlicensed work. Florida law protects contractors who document compliance. It does not protect property owners who trusted the wrong contractor. The difference between a fifteen-year roof and a forty-year roof is not the shingle warranty printed on the wrapper. It is fastener type, starter strip placement, valley metal gauge, and flashing detail execution, all of which require supervision by licensed personnel who will still be reachable when the callback happens.
Wind damage in Melbourne does not always appear as missing shingles. Micro-lifting during sustained gusts breaks the seal strip bond, allows water intrusion along the mat edge, and saturates the underlayment without producing visible exterior damage for months. By the time a ceiling stain appears, the decking is compromised and mold is established in the attic cavity. Conventional visual inspections from the ground or a ladder miss this entirely. Infrared thermography detects the temperature differential created by trapped moisture. We carry these cameras on every inspection. Most roofers do not own them.
Initial Inspection and Diagnostic Imaging
Our crews carry infrared cameras to locate moisture intrusion that is not yet visible from the interior, and we document findings with photos and written reports. Thermal imaging reveals trapped water in decking, saturated insulation along eaves, and compromised sheathing around penetrations. We deliver a written report with photos, identified deficiencies, repair recommendations, and a cost estimate within 24 hours. We do not require you to sign a work authorization form before the inspection, a practice some contractors use to control the claim process.
Our Custom Roofing Services

Roof Repair

Roof Replacement

Roof Inspection

Commercial Roofing

Storm Damage Roof Repair

Emergency Roof Repair

Metal Roofing

Asphalt Shingles

Tile Roofing
Award-Winning Florida Roofing Company
Get a FREE Quote Today!
Our team of friendly experts can assess the needs of your home and provide you with the knowledge you need to make informed decisions.
GAF Energy Roof Installations
Like the idea of solar but worry about roof strength during Florida storms? Solar shingles solve that by integrating directly into a durable roofing system that protects your home while generating clean energy. As roofing experts and certified GAF Energy installers, Roof Bear can build a roof that’s both storm-ready and energy-producing.
Reduce Bills by up to 50%
GAF Roofing Materials and Insulation seals your home like no other product on the market. We have seen this reduce energy bills by up to 50%!
Built for Florida
Our systems are designed and installed to handle Florida’s demanding weather while protecting your home for decades.
Roofing Experts + Solar Specialists
Roof Bear is a licensed roofing contractor and certified GAF Energy installer—so your system is installed the right way from the roof up.
Hear From Our Customers
Recent Melbourne Roofing Projects
This project was a reroof on a mobile home that had several areas of rot in the plywood that had to be replaced. It was also compromised at the intersection of the patio cover. We repaired all damaged and rotted substrate and installed new shingles, sealing and flashing throughout.
Work done in Ruth Circle inWest Melbourne, 32904. Permit number PRRF 26 0079
Photos and supervision by Orlando Dixon. Project completion August 2026.

Material Selection and Code Compliance
We install architectural shingles from GAF, CertainTeed, and Owens Corning, all carrying Miami-Dade County product approvals that certify wind resistance. According to Consumer Reports, multilayered architectural shingles are rated for winds of up to 110 mph, far exceeding the capability of three-tab products. We also install standing seam metal roof systems, 5V crimp metal roofing, corrugated metal, stone-coated steel, aluminum, Galvalume steel, galvanized steel, metal shingle, and metal tile configurations. Metal roofing in the Orlando area specifically costs $9 to $23 per square foot installed, translating to $18,000 to $40,000 for a 2,000 square foot home. For a typical 1500 square foot home in Florida, architectural asphalt shingles run approximately $7,500 to $12,000, while standing seam metal costs between $14,000 and $25,000, and tile roofing starts around $18,000.
Metal expands and contracts with temperature swings, so proper fastening and clip spacing are critical to prevent oil-canning and panel separation during high wind events. We follow manufacturer torque specifications for every concealed fastener clip and leave the thermal movement gap prescribed in the installation manual. Clay and concrete tile roofs are known for their longevity, low maintenance, and distinctive appearance. They can last 50 years or more with proper installation and care. We install both clay tile roofs and concrete tile roofs across residential and commercial projects in the Space Coast region.
Underlayment, Flashing, and Penetration Sealing
Florida roofs require self-adhering polymer-modified bitumen underlayment along eaves, valleys, and all penetrations. Chimney flashing is stepped and counterflashed with soldered corners, not caulked. Pipe boot flanges are metal with an EPDM collar, not all-plastic units that crack under UV within five years. Soffit and fascia must be ventilated and sealed against windblown rain while allowing continuous airflow. We install ridge vents with external baffles that meet the wind-driven rain test standard in ASTM E1646, which subjects panels to predetermined air pressure followed by 15 minutes of water spray to measure infiltration.
Ventilation and Energy Performance
Attic ventilation directly affects shingle lifespan. Inadequate ventilation traps heat, accelerates asphalt oxidation, and voids manufacturer warranties. Cool roof shingles with reflective granules reduce surface temperature and lower cooling loads. We install energy-efficient cool roof shingles and impact-resistant shingles across our service area. We also hold Master Elite Installer status with GAF Energy, certifying us to integrate GAF Timberline Solar shingles into your roof system. For homes requiring enhanced thermal performance, we offer Icynene spray foam insulation. Icynene spray foam helps seal these leaks, improving comfort and efficiency. We have seen this reduce energy bills by up to 50 percent.
Wind Uplift and Impact Resistance Testing
Florida code references multiple test standards. UL 580 ranks roofing assemblies by class: Class 30 qualifies the roof for a design pressure of 45 psf, UL Class 60 for 75 psf, and UL Class 90 qualifies the roof for a design pressure of 105 psf, including 48.5 psf positive from below and 56.5 psf negative pressure (or vacuum) from above. UL 2218tests a metal panel's resistance to puncturing or failing when it comes into contact with items such as hail or other small debris, dropping four steel balls of different sizes from varying heights onto the metal panels, with Class 4 being the toughest rating.
Permitting, Inspection, and Final Documentation
Every roof replacement and most repairs in Brevard County require a building permit. We pull permits, schedule inspections, and coordinate with the local building department. We evaluate compliance history during inspection and advise on permit scope before work begins. Once the jurisdiction signs off, we provide the certificate of completion, manufacturer warranty documentation, and all photos taken during installation. This record is essential for insurance claims and resale disclosure.
Regulatory Context for Roofing Work in Florida
On May 19, 2025, Governor Ron DeSantis signed House Bill 715 into law, enacting significant updates to Florida's roofing regulations. The law took effect immediately, introducing key changes for roofing contractors and residential homeowners, particularly regarding contracts executed during a declared state of emergency. Under the updated statute, homeowners who signed roofing contracts after a declared state of emergency can cancel contracts within 10 days of signing or before work begins, but the roofing contract must be signed within 180 days of the event that caused the emergency. This clarification, detailed in the Florida Senate bill summary, closes a loophole that allowed some contractors to initiate work without clear consumer protection timelines.
As of July 1st, 2026, Florida HB 803 takes effect, allowing certain building permit exemptions for small home improvement projects under $7,500. Roof replacements and most structural repairs will still require full permitting, inspection, and licensed contractor oversight. Brevard County enforces these statutes strictly. We carry the documentation, insurance certificates, and licensing that building departments verify before issuing permits. Unlicensed contractors cannot obtain permits legally, forcing homeowners to assume liability or hire a licensed contractor after the fact to correct deficiencies and obtain the permit retroactively at additional cost.
What Our Clients Say
"Roof Bear did an outstanding job on our roof replacement. They were professional, timely, and left our property cleaner than when they arrived. The crew was respectful and took great care in protecting our landscaping. We are extremely satisfied with the quality of work and would highly recommend them to anyone needing roofing services."
Jennifer L.
"From start to finish, Roof Bear exceeded our expectations. The estimate was detailed and transparent, the crew was skilled and efficient, and the final result looks fantastic. They handled everything including permits and inspections. Very impressed with their professionalism and attention to detail."
Michael T.
"We had significant storm damage and Roof Bear responded quickly. They worked directly with our insurance company, provided thorough documentation, and completed the repairs ahead of schedule. The quality of their work is evident and we feel confident our roof will last for decades. Highly recommend their services."
Patricia S.
"Roof Bear installed a metal roof on our home and we couldn't be happier. The team was knowledgeable about the different options and helped us choose the best solution for our needs and budget. Installation was seamless and the roof looks beautiful. Worth every penny."
David K.
Service Area
We serve Melbourne, Palm Bay, West Melbourne, Rockledge, Viera, Merritt Island, Cocoa Beach, Satellite Beach, Indian Harbour Beach, Indialantic, and surrounding communities throughout Brevard County, Florida. Our crews are dispatched from our central location and reach most Space Coast addresses within the same business day for emergency repairs.
Visualize Your New Roof!
See exactly what your new roof will look like with our free visualization tool.

Melbourne Roofing FAQs
Who are the best roofers in Brevard County, Florida?
The best roofers hold Florida state licensing, carry verifiable insurance, maintain manufacturer certifications such as GAF Master Elite or Owens Corning Preferred status, employ in-house labor rather than subcontractors, and provide written warranties backed by both the manufacturer and the installing contractor. Roof Bear meets all these criteria, holding Florida license CCC1334010, GAF Master Elite and President's Award recognition (top 1% nationally), and an A+ Better Business Bureau rating. We have completed over 7,000 roof installations in Florida with 48 in-house employees and maintain a 4.8-star rating across 200+ Google reviews.
What is the average cost of replacing a roof in Florida?
For a typical 1500 square foot home in Florida, architectural asphalt shingles run approximately $7,500 to $12,000, standing seam metal costs between $14,000 and $25,000, and tile roofing starts around $18,000. Costs vary by material type, roof complexity, code requirements, permit fees, and whether a full tear-off is required. According to estimates by HomeAdvisor, the national average ranges from $5,867 to $13,211, with the national average at $9,513, but Florida-specific requirements for wind resistance, underlayment, and hurricane protection often push costs higher than the national median. Request a detailed written estimate that itemizes materials, labor, permits, and disposal before authorizing work.
What is the 25% roof rule in Florida?
Florida Statutes 553.844(5) states that if an existing roofing system or roof section was built, repaired, or replaced in compliance with the 2007 Florida Building Code or any subsequent edition, and 25 percent or more of that roofing system or roof section is being repaired, replaced, or recovered, only the repaired, replaced, or recovered portion must be constructed to the Florida Building Code in effect. Roofs predating it remain subject to the full 25 percent rule in FBC-EB 706.1.1, which may require the entire roof to be brought into compliance with current code if more than 25 percent of the surface is being replaced. This can mandate a complete tear-off, upgraded fastening, enhanced underlayment, and structural reinforcement even when the homeowner intended only a partial repair. Your contractor should evaluate code compliance history during the initial inspection and advise on permit scope.
Which roofing company is considered the best in Melbourne?
The best roofing company in Melbourne holds active Florida licensing, maintains manufacturer Elite-tier certifications, employs its own crews without subcontracting, and has a documented track record of completed projects with verifiable customer reviews. Roof Bear is a GAF Master Elite and President's Award Contractor (top 1% nationally), holds Florida license CCC1334010, maintains an A+ Better Business Bureau rating, and has completed over 7,000 roof installations in Florida. GAF Master Elite status is earned by less than 2% of roofing contractors in North America. We employ 48 in-house workers, carry infrared diagnostic equipment, and provide written inspection reports within 24 hours. Our 4.8-star rating across 200+ Google reviews reflects consistent performance across residential and commercial projects throughout Brevard County.
Work With Licensed, Accountable Roofers in Melbourne
Roof Bear provides inspection, repair, replacement, and emergency services throughout Brevard County with in-house crews, infrared diagnostics, and full licensing. We respond to quote requests within 24 hours and offer financing starting at $0 down with approved credit. Call (407) 594-7302 or request a free inspection quote online.














